WIRELESS IOT ACCELEROMETER SENSORS

WIFI Sensor Series

BeanDevice® WIFI | Wilow® AX-3D

Available with several measurements range (±2g), the BeanDevice® WIFI | WiLow® AX-3D is a ULP (Ultra-Low-Power) Wireless vibration sensor (acceleration, peak particle velocity and amplitude) with a built-in data logger.

Thanks to WIFI technology, this wireless IOT vibration sensor can be used for dynamic measurement (up to 3kHz) without network bottleneck issues.

BeanDevice® WIFI | Wilow® AX-3DS

The BeanDevice® WiLow® AX-3DS is an ULP (Ultra-Low-Power) WIFI accelerometer dedicated to shock detectionwith built-in data logger and a scalable measurement range (±2/4/8/16g).

Thanks to WIFI technology, this wireless IOT sensor can be used for dynamic measurement without network bottleneck issues.

BeanDevice® WIFI | Wilow® X-INC

In many Structural Health Monitoring (SHM) projects, monitoring at the same time vibration and inclinations activities is crucial. Our practicalsolution is the BeanDevice® WIFI | WiLow® X-INC, the first wireless combo sensors on the market integrating high-end accelerometer and inclinometer sensors.

This wireless device is equipped with ULP (Ultra-Low-Power) WIFI technology enabling an open-standard wireless communication.

WIRELESS IOT ACCELEROMETER SENSORS

2.4GHz Sensor Series

BeanDevice® 2.4GHz AX-3D-SR

BeanDevice® 2.4GHz | AX-3D-SR

SCALABLE MEASURING RANGE ±1.2G and ±2.4G

The BeanDevice® 2.4GHzAX-3D SR is a high-performance wireless vibration sensor with a scalable measuring range (±1.2g and ±2.4g with automatic range adjustment depending on the application). It offers a high level of precision (±0.7mg for ±1.2g range, ±1.3mg for ±2.4g range at 1Hz ) and integrates a temperature sensor (located on the device base) for monitoring the temperature on your equipment or structure.

BeanDevice® 2.4GHz AX-3D

BeanDevice® 2.4GHz | AX-3D

Available in two versions (measurement range: ±2g or ±10g), the BeanDevice® 2.4GHz AX-3D is a wireless vibration sensor with built-in data logger.

Characterized by a waterproof (IP67/Nema 6) and a lightweight aluminum casing (80x55x36mm, 155g), an ultra-low power, a very low noise (35 µg/√Hz for ±2g version) and (60 µg/√Hz for ±10g version), an integrated data logger that can store up to 1 million data logs, this wireless vibration sensor is well suited for acceleration and velocity monitoring.

BeanDevice® 2.4GHz AX-3D Xrange

BeanDevice® 2.4GHz AX-3DS

BeanDevice® 2.4GHz | AX-3DS

Available in several versions (measurement range: ±2/4/8g or ±6/12/24g), the BeanDevice® 2.4GHz AX-3DS is a wireless accelerometer dedicated to shock measurement with integrated data logger.

The SSD (Smart Shock Detection) technology allows the BeanDevice® 2.4GHz AX-3DS to wake up from a deep sleep mode whenever a shock event is detected and transmits instantly measurement data to the BeanGateway® 2.4GHz (Wireless Coordinator).

BeanDevice® 2.4GHz | AX-3D Xrange

Available in four versions (measurement range: ±2g or ±10g, mounting process: screw or magnetic), the BeanDevice® 2.4GHz AX-3D XRange is a wireless vibration sensor with built-in data logger.

Characterized by a waterproof (IP67/Nema 6) and a lightweight aluminum casing (100x71x38mm), an ultra-low power, a very low noise (35 µg/√Hz for ±2g version) and (60µg/√Hz for ±10g version), an integrated data logger that can store up to 8 million data logs, this wireless vibration sensor is well suited for acceleration and velocity monitoring.