Wireless IOT Vibration Sensor | WIFI Sensors | Accessories - BeanAir

Go to content
Included Accessories
«M8 to USB Cable»
M8 to USB cable

Technical specifications:
1pcs M8-6pins to USB Cable, 2 meters length.
Ref: WL-CBL-M8-6P-USB-2M

«included accessories»
«M8 plastic cap»
M8 plastic cap

1pcs
Ref: WL-PC
«included accessories»
«magnet for power on/off»
Magnet for Power ON | Power OFF

1pcs Magnet.
Ref: WL-MGN
«included accessories»
«M5 screws locknut»
Wall mounting kit

4 pcs M5 screws+ Locknut.
Ref: WL-WIFI-SCMKIT
«included accessories»
Optional Accessories and Services
Mechanical Mounting Options
M8 cable

Technical specifications:
Molded Cable with M8-6Pins Male on one side and bare wires on the other side
For external Power supply (24VDC max if EHR option  is present ) or USB (5VDC)
Waterproof - IP67 (only on M8 Side)
Material : PVC
Ref: WL-CBL-M8-2M for 2 meters cable length
Ref: WL-CBL-M8-5M for 5 meters cable length
Ref: WL-CBL-M8-10M for 10 meters cable length

«Optional accessories»
Power-supply

Wall plug-in, Switchmode power Supply 5V @ 1,25A with USB plug Provided with power adapter:   North America / Japan / China or Europe or UK or Australia
«Optional accessories»
Mechanical Mounting Options
Solar Panel Kit

X-Solar 14ah | Solar Panel with Solar Charging Controller
Ref: X-SOL-14AH-SLP-VOUT-CL
>> More info

X-Solar 7ah | Solar Panel with Solar Charging Controller
Ref: X-SOL-7AH-SLP-VOUT-CL
«Optional accessories»
Mechanical Mounting Options
Solar Panel 5W

MonoCrystalline Solar Panel for BeanDevice® Wilow® power supply
( compatible with -EHR Power extension Only )
Maximum Power : 5W
Optimum operating Voltage: 12 VDC
Max Voltage = 17.8V
Max Current: 0.28A
Efficiency: 16%
Operating Temperature : -40°C to +85°C
Temperature Coeff. : -0.45%/°C
Dimensions : 250 x 185 x 25 mm  
Weight: 0.7kg
Protection Frame: Aluminum Frame , Waterproof IP67
Cable Length : 2 meters ( REF: WL-SLP-5W-2M ) or 5 meters ( REF: WL-SLP-5W-2M ) with M8-6 Pins plug for a direct to connection to the BeanDevice® Wilow®
Can work with the following Data Acquisition mode: Low Duty Cycle, Alarm, Streaming with Burst Data Acquisition Mode with battery saver mode enabled

   
«Optional accessories»
Mechanical Mounting Options
Suitecase

IP67 Suitcase for Wilow Sensors:
         - high quality special plastic
         - shock proof, break resistant and scratch proof
         - watertight seal around the lid
         - long life clip closure
         - long life fully length hinges
         - cubed foam in the bottom and convoluted foams in the lid
Can contain up to 4 x Wilow WIFI Sensors and related accessories (except WIFI Bridge and Antenna)
Dimensions (LxWxH): 258 x 243 x 167.5 mm
Weight : 1.1kg
Ref: WILOW-IP67-SUITCASE-01
«Optional accessories»
Mechanical Mounting Options

By default, the BeanDevice® Wilow® comes with a screw mounting lid. Two other mounting options are available:
• Magnetic mounting , add the extension –M on your product reference
 

• 90° bracket, add the extension –BR on your product reference
 
«Optional accessories»
Mechanical Mounting Options
«Optional accessories»
Mechanical Mounting Options
AC/DC Power Adapter for Wilow  Sensors

• Waterproof aluminum casing (IP67)
• Input voltage: 85-264 VAC
• Output voltage : 5VDC
• Can power supply up to 4 BeanDevice® Wilow®
Calibration Certificate

Calibration certificate provided by Beanair GmbH A static calibration method is used on a granite surface plate DIN876 ( Ref: WL-CERT-CAL )
«Optional accessories»
«Calibration Certificate»
LTE Router with WIFI Access Point ( integrated MQTT Broker )
«Optional accessories»
«LTE Router with WIFI Access Point (Europe)»
LTE Router with WIFI Access Point (Europe)

• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Integrated MQTT Broker
MQTT to FTP client converter +  Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
• Reference: WL-LTE-ROUTER-RUT240-EUROPE
«LTE Router with WIFI Access Point (japan)»
«Optional accessories»
LTE Router with WIFI Access Point (Japan)

• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter

• Region covered: Japan
• Frequencies
4G (LTE-FDD): B1, B3, B8, B18, B19, B26
4G (LTE-TDD): B41
3G: B1, B6, B8, B19

• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Integrated MQTT Broker
MQTT to FTP client converter +  Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors

• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
«Optional accessories»
LTE Router with WIFI Access Point (USA)

• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Configured and tested by Beanair for Wilow IOT Sensors
Integrated MQTT Broker
MQTT to FTP client converter +  Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, US Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
«LTE Router with WIFI Access Point (USA)»
«Optional accessories»
«LTE Router with WIFI Access Point with integrated MQTT Broker (Europe)»
LTE Router with WIFI Access Point with integrated MQTT Broker (Europe)

• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps with Double SIM Card
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 80 mm x 106 mm x 46 mm (H x W x D), Weight: 235g
Integrated MQTT Broker
MQTT to FTP client converter +  Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage: 9VDC, Input Voltage: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
«Optional accessories»
«LTE Router with WIFI Access Point with integrated MQTT Broker (USA)»
LTE Router with WIFI Access Point with integrated MQTT Broker (USA)

• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps with Double SIM Card
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 80 mm x 106 mm x 46 mm (H x W x D), Weight: 235g
Integrated MQTT Broker
MQTT to FTP client converter +  Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, US Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
Copyright 2025 © BeanAir - All rights reserve
Back to content