Included Accessories
M8 to USB cable
Technical specifications:
1pcs M8-6pins to USB Cable, 2 meters length.
Ref: WL-CBL-M8-6P-USB-2M
M8 plastic cap
1pcs
Ref: WL-PC
Magnet for Power ON | Power OFF
1pcs Magnet.
Ref: WL-MGN
Wall mounting kit
4 pcs M5 screws+ Locknut.
Ref: WL-WIFI-SCMKIT
Optional Accessories and Services
M8 cable
Technical specifications:
Molded Cable with M8-6Pins Male on one side and bare wires on the other side
For external Power supply (24VDC max if EHR option is present ) or USB (5VDC)
Waterproof - IP67 (only on M8 Side)
Material : PVC
Ref: WL-CBL-M8-2M for 2 meters cable length
Ref: WL-CBL-M8-5M for 5 meters cable length
Ref: WL-CBL-M8-10M for 10 meters cable length
Power-supply
Wall plug-in, Switchmode power Supply 5V @ 1,25A with USB plug Provided with power adapter: North America / Japan / China or Europe or UK or Australia
Solar Panel Kit
X-Solar 14ah | Solar Panel with Solar Charging Controller
Ref: X-SOL-14AH-SLP-VOUT-CL
Solar Panel 5W
MonoCrystalline Solar Panel for BeanDevice® Wilow® power supply
( compatible with -EHR Power extension Only )
Maximum Power : 5W
Optimum operating Voltage: 12 VDC
Max Voltage = 17.8V
Max Current: 0.28A
Efficiency: 16%
Operating Temperature : -40°C to +85°C
Temperature Coeff. : -0.45%/°C
Dimensions : 250 x 185 x 25 mm
Weight: 0.7kg
Protection Frame: Aluminum Frame , Waterproof IP67
Cable Length : 2 meters ( REF: WL-SLP-5W-2M ) or 5 meters ( REF: WL-SLP-5W-2M ) with M8-6 Pins plug for a direct to connection to the BeanDevice® Wilow®
Can work with the following Data Acquisition mode: Low Duty Cycle, Alarm, Streaming with Burst Data Acquisition Mode with battery saver mode enabled
Suitecase
IP67 Suitcase for Wilow Sensors:
- high quality special plastic
- shock proof, break resistant and scratch proof
- watertight seal around the lid
- long life clip closure
- long life fully length hinges
- cubed foam in the bottom and convoluted foams in the lid
Can contain up to 4 x Wilow WIFI Sensors and related accessories (except WIFI Bridge and Antenna)
Dimensions (LxWxH): 258 x 243 x 167.5 mm
Weight : 1.1kg
- high quality special plastic
- shock proof, break resistant and scratch proof
- watertight seal around the lid
- long life clip closure
- long life fully length hinges
- cubed foam in the bottom and convoluted foams in the lid
Can contain up to 4 x Wilow WIFI Sensors and related accessories (except WIFI Bridge and Antenna)
Dimensions (LxWxH): 258 x 243 x 167.5 mm
Weight : 1.1kg
Ref: WILOW-IP67-SUITCASE-01
AC/DC Power Adapter for Wilow Sensors
• Waterproof aluminum casing (IP67)
• Input voltage: 85-264 VAC
• Output voltage : 5VDC
• Can power supply up to 4 BeanDevice® Wilow®
Calibration Certificate
Calibration certificate provided by Beanair GmbH A static calibration method is used on a granite surface plate DIN876 ( Ref: WL-CERT-CAL )
LTE Router with WIFI Access Point ( integrated MQTT Broker )
LTE Router with WIFI Access Point (Europe)
• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Integrated MQTT Broker
MQTT to FTP client converter + Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
• Reference: WL-LTE-ROUTER-RUT240-EUROPE
LTE Router with WIFI Access Point (Japan)
• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• Region covered: Japan
• Frequencies
4G (LTE-FDD): B1, B3, B8, B18, B19, B26
4G (LTE-TDD): B41
3G: B1, B6, B8, B19
• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Integrated MQTT Broker
MQTT to FTP client converter + Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
LTE Router with WIFI Access Point (USA)
• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 83 mm x 74 mm x 25 mm (H x W x D), Weight: 125g
Configured and tested by Beanair for Wilow IOT Sensors
Integrated MQTT Broker
MQTT to FTP client converter + Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, US Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
LTE Router with WIFI Access Point with integrated MQTT Broker (Europe)
• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps with Double SIM Card
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 80 mm x 106 mm x 46 mm (H x W x D), Weight: 235g
Integrated MQTT Broker
MQTT to FTP client converter + Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage: 9VDC, Input Voltage: 100-240 VAC, EU Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors
LTE Router with WIFI Access Point with integrated MQTT Broker (USA)
• LTE Module (Europe): 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps with Double SIM Card
• WIFI Module: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
• WIFI Encryption: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
• LAN : 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• Dimensions: 80 mm x 106 mm x 46 mm (H x W x D), Weight: 235g
Integrated MQTT Broker
MQTT to FTP client converter + Alarms by SMS designed by Beanair
Configured and tested by Beanair for Wilow IOT Sensors
• Included:
1x AC/DC Power supply, Output voltage : 9VDC, Input Volatge: 100-240 VAC, US Power Adapter
2 x SMA Antennas for LTE, 1 x RP-SMA Antenna for WiFi antenna connectors